auteltech
image 1
image 1
image 1
image 1

MaxiDIAG MD808

Vehicle Diagnostic Scanner Tool

The all new MaxiDIAG MD808 is built to take your diagnostic experience to a whole new level. Loaded with oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor relearn and diesel particulate filter regeneration functions, MD808 can access Engine, Transmission, ABS, and Airbag (SRS) systems for the best diagnosis operations. With all that enclosed in a 4-inch hand-held device, there is no better multifunctional scan tool on the market.

  • image 1
  • image 1
  • image 1

• Support Read/Clear Codes and Live Data functions for Engine, Transmission, ABS, and Airbag (SRS) systems


• Read and clear trouble codes, control and test BMS/Oil Reset/ SRS/EPB/DPF systems


• Support oil service reset


• Support battery registration and reset


• Diesel particulate service including forced regeneration


• Reset steering angle sensor (SAS) functionality


• Relearn parking brake pad after replacement


• Reset service mileage and service intervals


• Turn off ECU brake warning light


• Perform O2 monitor, on-board monitor, I/M readiness and component testing


• Print diagnostic reports via PC connection


• Global OBD II coverage for U.S. domestic, Asian and European makes and models


• All OBD II protocols, all 10 test modes and enhanced OBD II mode 6 support

ProcessorARM® Thumb® Processor running at up to 400 MHz
Memory32MB, 166 MHz
Display4.0 inch LCD with 800x480 resolution
Connectivity

Mini USB: 2.0
               

Micro SD Card (16GB)

Power Consumption1.7 W
Operating Temperature-10°C to 60°C (14°F to 140°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
Operating Humidity5% - 95% non-condensing
HousingStrong plastic housing with protective rubber boot
Dimensions202 mm x 92 mm x 35 mm (8.35” x 3.62” x 1.4”)
Weight313 g (0.69 lb.)
  • Description
  • • Support Read/Clear Codes and Live Data functions for Engine, Transmission, ABS, and Airbag (SRS) systems


    • Read and clear trouble codes, control and test BMS/Oil Reset/ SRS/EPB/DPF systems


    • Support oil service reset


    • Support battery registration and reset


    • Diesel particulate service including forced regeneration


    • Reset steering angle sensor (SAS) functionality


    • Relearn parking brake pad after replacement


    • Reset service mileage and service intervals


    • Turn off ECU brake warning light


    • Perform O2 monitor, on-board monitor, I/M readiness and component testing


    • Print diagnostic reports via PC connection


    • Global OBD II coverage for U.S. domestic, Asian and European makes and models


    • All OBD II protocols, all 10 test modes and enhanced OBD II mode 6 support

  • Specifications
  • ProcessorARM® Thumb® Processor running at up to 400 MHz
    Memory32MB, 166 MHz
    Display4.0 inch LCD with 800x480 resolution
    Connectivity

    Mini USB: 2.0
                   

    Micro SD Card (16GB)

    Power Consumption1.7 W
    Operating Temperature-10°C to 60°C (14°F to 140°F)
    Storage Temperature-20°C to 70°C (-4°F to 158°F)
    Operating Humidity5% - 95% non-condensing
    HousingStrong plastic housing with protective rubber boot
    Dimensions202 mm x 92 mm x 35 mm (8.35” x 3.62” x 1.4”)
    Weight313 g (0.69 lb.)
  • Video
  • Comparison
  • Downloads
  • Accessories